sales@gamako.co.id +62 21 6902756 +628111707861

< Back
Armstrong

Inverted Bucket Steam Trap 2011 series / Stainless, 28 Bar, Screw 1/2" ~ 1"

Type : Inverted Bucket
Pressure : 28 Bar
Temperature : 427 C
Flow Rate : 340 ~ 390 Kg/Hr.
Size : 1/2" ~ 1"
Connection : NPT Thread, Socket Weld
Body : Stainless Steel
Trims : Stainless Steel

Armstrong 2000 series Inverted Bucket Steam Trap comes with Universal Connector. The benefits is to fit various angle upon Installation plus easy to replace Trap for maintenance. Used widely in Refinery as Down-Time is critical.
https://www.armstronginternational.com/sites/default/files/resources/files/2000%20Series%20Inverted%20Bucket%20Steam%20Traps.pdf

Inverted Bucket Steam Trap 2011 series / Stainless, 28 Bar, Screw 1/2" ~ 1" - Armstrong - Gamako


Share this product


Related Products

Armstrong

Double Duty series / Combination Steam Trap & Pumping Trap

Many cases in Heat Exchanger when the Control Valve closes, pressure drops not allowing Steam Trap to be lifted. As a result, Condensate fills the space of Heat Exchanger creating many trouble. Armstrong DD Trap solves this problem and yet functions normally as Steam Trap when there is enough pressure. Armstrong Series : PT 104, 200, 300, 400, 515, 3500
Armstrong

Steam Supply & Condensate Collection Manifolds MSD & CCA series

Steam Supply & Condensate Collection Manifolds are preassembled steam tracing package which saves Installation time. Vertical design saves space and improve safety.
Armstrong

Steam Trap Tester series UMT / Handheld Acoustic Sensor

Armstrong UMT tester is easy to use for Non-Technical Personnel. Just press the button and meter will scan in 5 to 10 seconds to display trap condition in either Good, Cold, Leak or Blow Through. This eliminate Human error in making judgement using older technology / Ultrasonic. Combination of two sensors Acoustic plus Infra Red deliver High Accuracy.
Armstrong

Trap Valve Station TVS-4000 series / 45 Bar, SC-SW 1/2" ~ 3/4"

Armstrong Trap Valve Station 4000 series is integrating 2 Isolating Valves, 1 Strainer, 1 Blow Down Valve into 1 Product. It saves space & materials cost, installation time, reducing leakage path on connection, It can be used on various Steam Traps ie Inverted Bucket, Disc, Float, Thermostatic etc.
Armstrong

Float & Thermostatic Steam Trap A series / 12 Bar, Screw 1/2" ~ 2"

Armstrong A series Float & Thermostatic Trap is for Process use with big Capacity. Since the Condensate Discharge hole is located at the bottom, it is prone to Plug by Dirt. Thus, Y-Strainer is crucial to be installed Upstream of the Trap. Furthermore, Check Valve needs to be installed Downstream to prevent Back Pressure from destroying the Float. If Stalled issue happens due to Low inlet pressure normally found in PHE installation, request Armstrong Double Duty Trap.
Armstrong

Thermostatic Steam Trap SH 1500 series / 124 Bar, SW-BW 3/4" ~ 1"

Armstrong SH-1500 Thermostatic / Bimetallic Steam Trap is ideal for Superheated Steam.

Our Location

Jl. Pinangsia Timur No.44
Jakarta 11110, Indonesia

Get Direction

Opening hour

Mon to Fri, 8 am to 4.30 pm
Sat - Sun (Close)

Drop a message

sales@gamako.co.id
+62 21 6902756,
+628111707861,

Mail Us