sales@gamako.co.id +62 21 6902756 +6281210113067

< Back
Armstrong

Double Duty series / Combination Steam Trap & Pumping Trap

Type : Double Duty
Application : Solution for Stall
Pressure : 7 ~ 1`0.3 Kg/Cm2
Temperature : 93 C
Flow Rate : 159 ~ 36,287 Kg/Hr.
Size : 1" ~ 3"
Connection : Screw NPT, Flange ANSI 150

Many cases in Heat Exchanger when the Control Valve closes, pressure drops not allowing Steam Trap to be lifted. As a result, Condensate fills the space of Heat Exchanger creating many trouble. Armstrong DD Trap solves this problem and yet functions normally as Steam Trap when there is enough pressure. Armstrong Series : PT 104, 200, 300, 400, 515, 3500
https://www.armstronginternational.com/products-systems/steam-condensate/condensate-recovery-equipment/armstrong-double-duty%C2%AE-series-steam-trappump-combination

Double Duty series / Combination Steam Trap & Pumping Trap - Armstrong - Gamako


Share this product


Related Products

Armstrong

Thermodynamic Steam Trap CD-33S series / 41 Bar, Screw 1/2" ~ 1"

Armstrong CD-33S series Thermodynamic / Disc Trap is Compact in design. It is not recommended for Outdoor Use as the rain will cause the Trap to blow Live Steam. It is prone to Air Lock on start up and has a short life as wear & tear is high. Unless space is a limit, it is advisable to use Inverted Bucket type Steam Trap for Saving Energy.
Armstrong

Float & Thermostatic Steam Trap A series / 12 Bar, Screw 1/2" ~ 2"

Armstrong A series Float & Thermostatic Trap is for Process use with big Capacity. Since the Condensate Discharge hole is located at the bottom, it is prone to Plug by Dirt. Thus, Y-Strainer is crucial to be installed Upstream of the Trap. Furthermore, Check Valve needs to be installed Downstream to prevent Back Pressure from destroying the Float. If Stalled issue happens due to Low inlet pressure normally found in PHE installation, request Armstrong Double Duty Trap.
Armstrong

Thermostatic Steam Trap SH 1500 series / 124 Bar, SW-BW 3/4" ~ 1"

Armstrong SH-1500 Thermostatic / Bimetallic Steam Trap is ideal for Superheated Steam.
Yoshitake

Steam Trap / Thermodynamic / Disc TSD-42 / 42 Bar, Screw 1/2" ~ 1"

Jual Thermodynamic Steam Trap dengan tekana 42 Bar dan panjang sama dengan beberap merek2 lain. Yoshitake TSD-42 / Drat dan TSD-42 / Flange di-pakai tidak untuk Proses karena kapasitasnya kecil.
Armstrong

Thermostatic Steam Trap SH 900 series / 62 Bar, SW-BW 1/2" ~ 1"

Armstrong SH-900 series Thermostatic / Bimetallic Steam Trap is ideal for Superheated Steam / High Pressure, High Temperature.
Armstrong

Steam Trap Tester series UMT / Handheld Acoustic Sensor

Armstrong UMT tester is easy to use for Non-Technical Personnel. Just press the button and meter will scan in 5 to 10 seconds to display trap condition in either Good, Cold, Leak or Blow Through. This eliminate Human error in making judgement using older technology / Ultrasonic. Combination of two sensors Acoustic plus Infra Red deliver High Accuracy.

Our Location

Jl. Pinangsia Timur No.44
Jakarta 11110, Indonesia

Get Direction

Opening hour

Mon to Fri, 8 am to 4.30 pm
Sat - Sun (Close)

Drop a message

sales@gamako.co.id
+62 21 6902756,
+6281210113067,

Mail Us